Technologies

The SMBR™ is particularly well suited to treat high or variable loads.  The technology is used to treat wastewater and makes it possible to increase the capacity existing plants in order to meet the strictest BOD₅ and ammonia nitrogen standards.

ADVANTAGES

• Can be combined with other technologies: floatation, clarification, lagoons, etc.
• Double or triple the capacity of an existing treatment system.
• Ease of operation.

THE SMBR SYSTEM IS IDEAL FOR

• Increasing capacity of existing facilities (retrofitting).
• Treating municipal, industrial, commercial and institutional effluent.
• Treating large loads.
• Polishing the biological treatment effluent.
• Carrying out cold water nitrification.

Operational support service and remote monitoring available. The SMBR™ can be incorporated into existing treatment chains, depending on targeted results.

APPLICATIONS

• SMBR™ bioreactors with or without sludge return.
• Peenox™ media added to existing activated sludge.
• SMBR™ bioreactors installed in series (treatment stages).
• Bioreactors installed ahead of existing biological treatments: aerated lagoons, Sequencing Batch Reactors, activated sludge

Contact our representative to find out more.

SMBR™ and Peenox™ are trademarks of Mabarex

Contact our representative to find out more.

ULTIMO™ is a registered trademark of Mabarex

A PROVEN AND DEPENDABLE DESIGN FOR THE MOST DEMANDING MUNICIPAL
OR INDUSTRIAL APPLICATIONS

FEATURES AND BENEFITS

• Very rugged: no submerged mechanical parts

• Jam-proof

• Easy to maintain

• Easily lifts large loads of solids from the bar rack

• Not affected by sudden fluctuations in volume of debris, load or flow

• Multiple extra heavy-duty rakes

• Low headroom structure

• Drive with shear pin or electro-mechanical protection

• Single or double head shaft designs available

• Unlimited channel depths. Width up to 5 m

• Bar spacing: 9.5 mm or more

• Removable screen, if required

• Custom-made

Contact our representative to find out more.

CAT-REX™ is a registered trademark of Mabarex

SAFE AND EFFICIENT OPERATION IN SHALLOW CHANNELS

FEATURES AND BENEFITS

• Simplified design

• Low maintenance

• Easy to operate

• For channel widths of 200 mm or more

• Very efficient helicoidal gear drive system

• Electro-mechanical overload protection

• For concrete or steel prefabricated channels

• Ideal for low flows

• Bar spacing: 9.5 mm or more

• Models with perforated plates and brushes available for fine screening

• Municipal or industrial wastewater applications

Contact our representative to find out more.

ROTOFLO™ is a registered trademark of Mabarex

VISTEX™ combines circular and conical shapes with natural vortex and gravity forces to reduce turbulence in the chamber. To achieve the highest level of efficiency, the flow velocity is maintained at a constant value by using adjustable rotating impellers in the lower chamber.

FEATURES AND BENEFITS

• Solid removal up to 89 mm (3½") in diameter

• Simple installation due to the piping location in the centre of the drive system

• Supplied with a low-speed agitator with adjustable impellers

• Constant speed drive system or optional variable speed drive system

• Units sized to accommodate flow ranges between 3,800 and 288,000 m³/d

• Capture efficiency not affected by flow variation

• Grit extraction by air lift or grit pump

• Increases operating life of downstream pumps and systems

• Hydraulic head loss: 25 mm or less

•  Few moving parts

• Low energy consumption

• Central drive housing easy to install and inspect

Contact our representative to find out more.

VISTEX™ is a registered trademark of Mabarex

The BIOCYCLE™ technology is an activated sludge system that operates in time rather than in space. All steps take place in predetermined operating sequences, in the same tank, instead of moving from one tank to another.

• Very high efficiency on BOD₅ and SS removal. Has proven nutrient removal capabilities without chemical addition (nitrification, denitrification and biological phosphorus removal).

• Single or multi-tank design for industrial and municipal applications.

• Easy retrofit of existing facilities of all types and/or geometry.

• Large choice of aeration and mixing equipment: flexible fine bubble diffusers, coarse bubble diffuseurs, jets aerators, floating aerators/mixers, submersible horizontal mixers

Contact our representative to find out more.

BIOCYCLE™ is a registered trademark of Mabarex

The Dissolved Air Flotation (DAF) system utilizes inclined corrugated plate technology yielding very high flow rates in a small footprint. The system features all stainless steel construction and is equipped with two high pressure recirculation (air dissolving) pumps; one pump operating and one pump as a 100% stand-by.

Very high solids concentration is achieved in the float material using a full-length skimmer system and unique static dewatering grid. Settled solids are discharged through automatic drain valves. System operation can be either manual or automatic using an automated control panel that integrates with other installed equipment, (feed pumps, chemical feed systems, etc.).

The DAF may be installed as a pretreatment system, with or without chemical treatment, or as a clarifier for biological systems.

A few characteristics:

• High flow rates
• Compact footprint
• Stainless steel construction
• Reliable micro-bubble flotation
• Inclined plate design
• Automated controls
• Flotation and settling in single system